Small Mouth Sounds

 

Directed by Julia Devine

Scenic Design by David Utley

Costume Design by Jeremy Pritchard

Lighting Design by John Ambrosone

Props Design by David Utley

Sound Design by Allen Sanders

Stage Managed by Breanna “B” Strife

Technical Direction by Ethan Rosing

 

End of Show

 

Drafting Samples

The production was designed around the concept of a silent retreat in the woods and to envelop and include the audience in our retreat. The scenic design focused on structure, form, and fabric. The fabric, also the primary projection surface, was overlapping sections of 56 inch muslin 25 feet long to form the main sail and fixed side panels. The same fabric was also used to bring the design into the house with six panels of the same muslin that were 12 feet long. The main sail and fixed side pieces included a pipe pocket at the mid point. The additional pipe allowed the sail to be pulled upstage and give it depth and it was the attachment point for the winches. The tops of the sail and fixed side panels are all rigged from the same batten. The fixed side panels also have a pipe pocket at the mid-point but they are hung independently of the main sail. The main sail being able to move in and out aids in the ability to change locations; in addition the panels of fabric are not sewn together below the mid-point allowing them to be drawn up in different ways. In the video above, you can watch the final moments of the show which show some of how the sail was used throughout the production.

As the production evolved the idea of a fire pit for the closing ceremony of the retreat came about. Venue regulations currently prohibit open flame and sparks so a small rolling fire pit was designed. The fire pit used a battery powered lighting panel on the interior with wireless control for interior illumination. The unit used four triple-swivel casters attached to pneumatic cylinders.

The scenic build cost $4,566.26. The majority of the costs were in the purchase of rigging hardware and fabric. The production made use of stock truss, motors, and winches. Below is a rough cost breakdown by category.

  • 3/4” MDF - $429

  • Plywood - $445

  • 2x4 - 56

  • Muslin - $785

  • Steel and Aluminum - $855

  • Consumables and Fasteners - $773

  • Rigging Hardware - $1181

  • Magnets - $64